Insulation contractor in Rowlett, TX - attics sealed first, then insulated
Steadfast Dallas Spray Foam Insulation is an insulation contractor working in Rowlett, TX. We seal attic gaps, then add blown-in or spray foam insulation, and we insulate walls, crawl spaces and rooms over the garage.
Rowlett houses as we see them on the job
Rowlett is the city with Lake Ray Hubbard wrapped around two sides of it. Our calls there come from homeowners, and from landlords and property managers with a rental or two in the city, which is the kind of work I started out doing.
The attics we get into in Rowlett look a lot like the ones in nearby Mesquite and across the metro in Grapevine, usually with old blown-in that has settled thin. What moves the price is the size of the attic, how many inches are already up there and whether any of it has to come out first. The schedule turns mostly on that removal, on foam versus loose fill, and on whether the city wants a permit. Your own figure comes from the estimate, and I write it after I've been up the ladder, because in these houses the attic decides the job more than the floor plan does.
Rowlett houses and what usually needs fixing
These are the things I check for on most Rowlett estimates, because they decide whether a job is a quick top-up or needs work done in a certain order.
A room over the garage usually got the thinnest insulation in the house, so it runs hotter or colder than everything around it.
Vents along the roof edge get buried under blown-in, the attic stops breathing, and moisture starts showing up in the framing.
Ductwork running through the attic is common, so I look at its joints and at the spots where each run meets the ceiling.
Rowlett sits in both Dallas and Rockwall counties, split at Dalrock Road, but houses on either side go through the same city building office.
I'd rather see your attic before quoting it, so the estimate covers what's really up there and not a guess from the driveway.
Working in Rowlett from our Dallas base
We're an insulation contractor based in Dallas, TX, and Rowlett is one of the cities around it where we work, along with Richardson and Mesquite. If you don't see your city below, call and ask.
Insulation services for Rowlett homes
Spray foam insulation
When ductwork runs through the attic or a room over the garage won't stay comfortable, spray foam seals and insulates at once, though it costs more.
Attic insulation
Most of our calls start in the attic. We measure how many inches are already up there, seal the gaps, then build up the thin spots, edges first.
Blown-in insulation
Blown-in insulation is loose fill we blow through a hose, and it's how we usually top up a settled attic, since it packs around joists and wiring.
Home insulation
If the whole house feels drafty, I check the attic, walls and floors at the estimate and rank them in the order worth fixing.
Insulation removal
We clear out old insulation that's wet, matted or full of droppings, bag it and haul it off, so the attic starts clean before anything new goes in.
Crawl space insulation
Cold floors over a crawl space usually mean the underside of the floor was never insulated or the batts have dropped, and we fix both from below.
Wall insulation
A room that never matches the rest of the house often has empty or slumped wall cavities, and we can usually fill them through small, patched holes.
Air sealing services
Air sealing, closing the gaps where air leaks through, covers the whole house, from plumbing holes under sinks to the door into the garage.
Basement insulation
If your house has a basement or a room set partly below ground, we insulate its walls so it stops running colder than upstairs.
Closed-cell foam insulation
Closed-cell foam, the dense kind that also blocks moisture, is what we use where dampness is part of the problem, such as crawl space walls.
Open-cell foam insulation
Open-cell foam is lighter and softer, and it's the usual pick for the underside of the roof when your ductwork runs through the attic.
Commercial insulation
Landlords and property managers call us for rentals and small commercial buildings, and we schedule around tenants so the work gets done without a fuss.
Crawl space vapor barrier
A vapor barrier is a plastic sheet over the crawl space dirt, and we lay it with overlapped, taped seams so ground moisture stays away from the floor.
Vapor barrier installation
Outside the crawl space, we put vapor barriers where damp air would otherwise reach a cool surface and condense, but only after we've found where the moisture starts.
Attic air sealing
In the attic, we seal around can lights, pipes, wires and the hatch from above before insulation goes down, the step that gets skipped most.
Retrofit insulation
Retrofit work adds insulation to a finished, lived-in house without a remodel, and I'll tell you at the estimate whether it's worth doing in yours.
Get a free on-site insulation estimate in Rowlett
We reply to calls and form requests within one business day to set up a visit. I come out to your Rowlett house myself, look at the attic and anything else that's bothering you, and write the estimate. It's free, done on site, and there's no obligation to book.
- Call
- (214) 706-4099
- Hours
- Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM
Why Rowlett homeowners and landlords call us
I started this business in 2017 after years of attic and crawl space upkeep for a property management company. Here's what that means for a job in Rowlett, and our work is satisfaction guaranteed.
The estimator checks the install
Our crew does the install, and I check the work myself before we call it done. We're licensed and insured, and the person who wrote your estimate is the one who signs off.
Problems fixed, not buried
Insulation laid over a roof leak or bad wiring just hides the problem, and I cleaned up after plenty of that. If something up there needs fixing first, you'll hear it from me before we cover anything.
Told when a job isn't needed
I'd rather tell you a job isn't needed than sell you one. If your attic has enough up there and a few open gaps are the real problem, the estimate will say so. Call (214) 706-4099 to set one up.
Insulation questions from Rowlett homeowners
Do I need a permit to insulate my attic in Rowlett, TX?
The City of Rowlett's permit list doesn't settle it, because it names remodeling, roofs, and plumbing, HVAC and electrical work but not insulation on its own. When it's unclear, the city recommends checking with its building safety office before work begins, and if your job touches ductwork or wiring, that part may need a permit. We check with the city before we start either way.
How do I check that an insulation contractor can pull permits in Rowlett?
Ask whether they're registered with the city, because Rowlett runs its own contractor registration, and a contractor registers to apply for permits and request inspections there. It's a fair question for anyone who quotes your job. When a job needs a permit, we handle the application and the inspections with the city.
What building code does Rowlett use for insulation work?
Rowlett builds to the standard model codes, including the residential code and the energy code that deals with insulation, with local changes the city has approved for most of them. Some jobs also call for an energy or special inspection, and that report has to be uploaded to the city no later than when the final inspection is scheduled. On a permitted job, keeping that in order is part of the inspections we handle.
How much does it cost to insulate an attic in Rowlett?
Sealing the gaps and topping up with blown-in is usually the least expensive way to do a Rowlett attic, and spray foam costs more. Foam earns its price when your ductwork runs through the attic, because it seals and insulates at the roofline and brings the ducts inside the insulated space. Your own figure comes from the estimate, once I've seen how much is up there and whether any of it has to come out.
How long does attic insulation take, and do we have to leave the house?
Sealing and topping up with blown-in is usually a short job, and you can usually stay home while we work. Pulling out old material or spraying foam adds time, and with foam you, the kids and the pets stay out until the re-entry time, the wait before it's safe to come back in, has passed. I'll tell you that wait for the product we're using before we put you on the schedule.
What causes the upstairs to stay hot in a two-story Rowlett house?
Usually it's the attic, either thin insulation near the edges or air leaking through gaps in the ceiling below it. A lot of attics end up deep in the middle and thin at the edges, which is backward, and unsealed gaps let air push straight past whatever's on top. We seal first, then even out the coverage, edges included.
Ask about your Rowlett attic today
Call (214) 706-4099 any day until 9 PM, or use the contact form, and tell us whether it's a hot room, a drafty hall or the power bill, so I know what to look at first when I come out.
Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM