Insulation contractor in Bedford, TX - sealed attics and cooler upstairs rooms
Steadfast Dallas Spray Foam Insulation is an insulation contractor based in Dallas that works in Bedford, TX, sealing attic gaps, topping up or replacing tired insulation, and insulating walls, crawl spaces and rooms over the garage.
Bedford homes and what we find in their attics
Bedford is mostly settled neighborhoods of single-family homes with some rentals mixed in, and it's an easy drive from our base in Dallas. The calls here come from homeowners and from landlords and property managers, much like the ones we get in Euless and Grapevine nearby.
A lot of the houses here have some years on them. When I pull down the attic hatch, I usually find a few inches of insulation that settled long ago and holes around can lights and pipes that nobody sealed. Some houses have a room over the garage that stays hot upstairs all summer, and a few older ones sit over a crawl space, with cold floors to match. That's why every Bedford job starts with sealing and a look at what's under the old material, and only then do we decide how much to add and what kind.
Why Bedford attics need more than a top-up
Bedford houses face hot summers and real freezes. Most of what I find in their attics comes down to what was done, or skipped, when the insulation first went in.
Dallas/Fort Worth averages about 20 days a year at 100 degrees and about 29 freezes a season, so attic insulation here works hard both ways.
In many Bedford homes the ductwork runs through the attic, so cooled air travels through the hottest space in the house before it reaches you.
Insulation piled over the eave vents stops the attic from breathing, and the trapped moisture ends up in the roof framing.
Older jobs often went deep in the middle and thin at the edges, which is backward and leaves rooms along outside walls hotter.
Price and schedule turn on what's already up there, how much has to come out and how easy the attic is to reach, so I look before I quote.
Where we work, Bedford included
We're based in Dallas and work across the city and the cities around it, Bedford included, along with Irving and Arlington. If your city isn't listed below, call and ask.
Insulation services we offer in Bedford
Spray foam insulation
When ductwork runs through a Bedford attic, spray foam at the roofline seals and insulates in one pass. It costs more, so we'll say if it's worth it.
Attic insulation
A hot upstairs is the call we get most in Bedford. We seal the attic floor first, then add insulation where it's settled thin, hatch included.
Blown-in insulation
Blown-in insulation is loose fill sent through a hose, and it's the usual way to top up a settled Bedford attic after we keep the eave vents clear.
Home insulation
For a whole Bedford house that's drafty in winter and hot in summer, we go attic to walls and fix the worst spots first.
Insulation removal
When old attic insulation is soaked from a past roof leak or full of droppings, we take it out first, because new material on top just hides it.
Crawl space insulation
Some older Bedford homes sit over a crawl space, and that's usually where cold floors come from. We insulate under the floor and seal the openings.
Wall insulation
Exterior walls in older Bedford houses can be thin or empty in spots. We fill them through small holes and patch them, so nothing gets torn out.
Air sealing services
Drafts in a Bedford house don't all start in the attic. We close leaks at the garage wall, under sinks and at outlets on outside walls.
Basement insulation
Not many Bedford houses have a basement, but when one does, we insulate the walls and the rim along the top so the space stops feeling cold.
Closed-cell foam insulation
Closed-cell foam is dense foam that blocks moisture as well as heat. We use it on Bedford jobs where water is a worry, like a crawl space.
Open-cell foam insulation
Open-cell foam is lighter and less costly than closed-cell. It fills odd cavities well, which helps in a Bedford room over the garage with sloped ceilings.
Commercial insulation
For landlords and property managers with Bedford rentals, offices or small retail spaces, we schedule around tenants and keep the mess inside the work area.
Crawl space vapor barrier
A plastic barrier over the dirt in a Bedford crawl space keeps ground moisture out of the floor and insulation above. We seal the seams and edges.
Vapor barrier installation
On Bedford jobs, a vapor barrier goes only where moisture could reach the insulation, like a wall beside a damp space. We'll say when you don't need one.
Attic air sealing
Attic air sealing closes gaps around can lights, pipes, wiring and the hatch before insulation goes in. It comes first in Bedford attics, since insulation won't stop a draft.
Retrofit insulation
Retrofit work is adding insulation to a Bedford house that's already finished and lived in. We work through the attic, the crawl space and small wall openings.
Get a free on-site insulation estimate in Bedford
Send the form or call, and we'll get back to you within one business day to set a time. I come out to your Bedford house myself, go up in the attic and write the estimate on site. It's free, and there's no obligation.
- Call
- (214) 706-4099
- Hours
- Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM
Why Bedford homeowners and landlords call us
Bedford homeowners call us, and so do landlords and property managers who need the work done around tenants without a fuss. Here's what you can count on.
We seal before we insulate
I learned this work doing upkeep for a property management company, and I cleaned up after plenty of crews who skipped steps. Insulation over gaps, a leak or bad wiring just hides the problem, so we fix those first.
The person who quotes checks the work
I come out to look at your attic and write the estimate myself. Our crew does the install, and I check it before we call the job done, so you deal with one person start to finish.
Straight answers since 2017
Licensed and insured, in business since 2017. Satisfaction guaranteed. I'd rather tell you a job isn't needed than sell you one. Call (214) 706-4099 to set up a visit.
Bedford insulation questions we hear most
Do I need a permit to add insulation to my attic in Bedford, TX?
The city's permit list doesn't name insulation, so the way to know for sure is to ask the Building Inspections Division, which issues Bedford's building permits. It matters, because work started without a permit it needed draws an investigation fee equal to the permit fee, and the city collects it even if a permit is never issued. We check with the city before we start, and when a job needs a permit, we handle the application and the inspections.
Do contractors have to register with the City of Bedford before doing work?
Yes, anyone doing work the city regulates inside Bedford registers with the city as a contractor before getting permits, and that registration is good for twelve months at a time. Heating and air or electrical work also needs a permit and a contractor licensed by the State of Texas. So if I find bad wiring or a loose duct in your attic, the right trade fixes it before we put insulation over it.
What building codes apply to insulation work in Bedford?
Bedford builds to the International Residential Code and the International Energy Conservation Code, with regional amendments, and the energy code is the one that covers insulation. During construction, the city's inspectors check energy work against local, state and federal rules. When a job needs a permit, we do the work to pass that inspection, not just to look full from the hatch.
How do I apply for a building permit in Bedford online?
You create an account on the city's online permit portal, then submit the permit, track its status and message city staff there. If you'd rather talk to someone, the city's main number is 817-952-2100. When your insulation job needs a permit, we take care of the application, so you don't have to learn the portal.
How much does attic insulation cost in Bedford, TX?
The price comes down to what's already in your attic and what has to happen before new insulation goes in. Old insulation that's soaked or full of droppings has to come out first, which is the part nobody budgets for, and a lot of gaps to seal adds time. Foam costs more than loose fill and seals air while it insulates, but sealing the gaps and topping up with blown-in usually wins, unless your ductwork lives up there. I'll give you the number once I've seen it.
How long does attic insulation take, and when can we go back in the house?
The time in your attic depends on how much has to come out and how much sealing there is, and I'll tell you how long once I've been up there. With blown-in insulation you usually don't need to leave at all. Spray foam is different, so everyone, kids and pets included, stays out until the re-entry time, the wait the foam's maker sets before you can come back, and I'll tell you that wait before we book the day.
Talk to us about your Bedford attic
We're open seven days a week and into the evening, so call (214) 706-4099 or send the form whenever it suits you.
Mon–Fri: 8 AM–9 PM, Sat–Sun: 6 AM–9 PM